2 AK's shingles (magazines pouch) SPLAV

A 2 AK's shingles for 30 rounds AK-74 / AKM mags. Also can be used with RPK-74 / RPK mags.

• Mounting: two or four removable clips, not included. For attaching to the classical PALS / MOLLE system, four cells are required in width and two to three horizontal rows of cells in height. Attention! To fasten the pouch, you must purchase two or four identical clips of the following types:
• For PALS / MOLLE platforms and belts with a width of up to 50 mm inclusive: 2M MOLLE 125 mm, 5 "TacTie (Maxpedition), MALICE Long (Tactical Tailor), FixClip 5 "(Kiwidition)
• For belts with a width of up to 60 mm inclusive: 2M MOLLE 60 mm
• For belts with a width of 58-60 mm (for example, US Belt): ALICE, 2M MOLLE 60 mm
• The pouch is designed for a dense planting of mags. It is recommended to place the mags with the lid on top
• Pockets are separated by a small gap, pushing mags relative to each other. This allows you to grab your fingers on a separate mag on the sides without interference from the neighboring mag. In addition, it protects mags from collision
• Removable adjustable clasp of 4 mm elastic cord and stitch, pressing the top of the mag. To remove the magazine, it is necessary to take the hold to the side. The length of the cord is adjusted by means of a knot on the back wall of the pouch (the cord wraps the top string of UniClick). The length of the cord with a stock, taking into account the height of the store RPK-74 / RPK and the convenience of tying. Hypalon heavy-duty material (similar to Cordura® 1060d, laminated on both sides with artificial rubber), preventing slipping of the hold against the mag and fingers
• In this pouch, the hooks are Y-shaped (bifurcated to the bottom). When using the AKM and RPK-74 / RPK shops because of their strong curvature, the usual grip can slip off the mag's sloping cover, so the bifurcating part of the mantle is put on the upper corner of the mag, ensuring a reliable hold
• Detachable adjustable pull-out of 4 mm elastic cord, wrapping the magazine across, independent for each of the two pockets of the unit. The length of the tightener is adjusted by means of the assembly from the side of the pouch. The length of the cord with a margin that takes into account the convenience of tying. Allows you to firmly hold the mag without using the fastener (for quick access)
• The front wall of the pockets is made of two layers of Cordura® 500d, between which is a piece of plastic. Plastic supports the shape of the pocket, facilitating the introduction and removal of mags, and also does not give a tightly stretched elastic cord to deform the front wall, which could make it difficult to insert mags inside
• The outer surface is clad with PALS cells for attaching additional pouches, 4 cells wide, 3 rows in height. Instead of the slings, a ribbon is used, sewn from several layers of the main fabric (Cordura® 500d). It is not inferior to the usual line of strength and provides a uniform appearance of the pouch, especially in camouflage versions. The PALS cells are arranged so that when a similar set of 2 AK shingles or single AK shingles is placed on top of them, both layers of pouches and mags are at the same height
• The back wall is made of Cordura® 500d fabric with a lining of Hypalon's sturdy non-slip material, which helps to keep mags without using a fastener if you need a quick access
• All sections of fabric and lines are edged for reliability and neat appearance
• At the bottom there are eyelets for water drainage

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon), Hypalon ORCA® (Belgium)
• Size : 19.5 × 17.5 × 3 cm
• Weight: 160g