Pocket EDC organizer SPLAV

Pouch-organizer with a zipper for convenient placement of small items, designed for carrying in the cargo pockets of tactical and field trousers, as well as inside backpacks and bags. It can also be used as a regular pouch attached to the outside of the outfit

• Mounting: two or three removable clips, not included. For attaching to the classical PALS / MOLLE system, three cells in width and two horizontal rows of cells in height are necessary. Attention! To fasten the pouch, you need to purchase two or three clips of the following types:
• For PALS / MOLLE platforms and belts with a width of up to 50 mm inclusive: 2M MOLLE 75 mm, 3" TacTie (Maxpedition), MALICE Short (Tactical Tailor)
• For belts with a width of up to 60 mm inclusive: 2M MOLLE 60 mm
• For belts with a width of 58-60 mm (for example, US Belt): ALICE, 2M MOLLE 60 mm
• The pouch has a minimum thickness, the projecting and engaging structural elements (clips, half rings) are absent. Due to this, it is easily placed inside various pockets and equipment compartments. On the back wall of the sewn is a simple handle from the slings for quick extraction
• On the front surface is a flat pocket of fabric with an entrance from above (convenient for pens, notepads, cards and other items requiring quick access). From above on the pocket of the sewn velcro-loop (7.5 × 5 cm) for fastening chevrons
• The main compartment is on a two-zippered zipper (type 10). Lightning is sewn directly to the back and front wall to minimize the thickness of the pouch, and unfastens completely to the very bottom. Instead of metal tabs, we use hinges from the paracord (noiseless, impossible to break)
• Internal organization of the rear wall: A flat pocket of fabric Oxford 210d with an entrance from above, on which sewn three rows of rubber bands (38 mm, 25 mm, 25 mm) one on top of the other in one layer. The elastic bands are divided by bracing into three rows of cells of the same width (the size is optimal for typical multitools, small lanterns, folding knives, etc.). To the top is sewn a loop of braid to hang items on the carbine (keys, key chains, etc.)
• Internal organization of the front wall: A flat pocket of fabric Oxford 210d with an entrance from the top, with a zip (protection against falling out of small things), on which three rubber bands (38 mm, 25 mm, 25 mm) are sewn one on top of the other. The elastic bands are divided by bracing into two wide rows of cells and one narrow (pens, markers). To the top is sewn a loop of braid for hanging items on the carbine
• This arrangement of rubber bands (one on top of the other in one layer) makes it possible to efficiently distribute objects over the maximum area: Long objects (pens, markers, forks / spoons) are fixed along the entire height, do not hang sideways. Short heavy objects are securely fastened near the bottom of the pouch by the lower elastic band (in the classical system with an elastic band in the middle they fall down). Many objects are fixed in several layers  
• All sections of fabric, lanyards and rubber bands are edged or hidden in seams for reliability and neat appearance
• The eyelet is not on the bottom, so as not to scratch the contents and protect from the loss of small items

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon), Oxford 210d (100% nylon)
• Velcro: Alfatex® (Belgium)
• Zippers: SBS®
• Cord: Paracord 550, 100% nylon
• Size: 17 × 14.5 × 2 centimeters
• Weight: 123 g