Pouch for 2 AK74 magazines with velcro and button SPLAV

Pouch for two AK74 mags on Velcro and button. A more simple and inexpensive alternative for a pouch for 2 AK mags on velcro adjustable.

• Mounting: Third generation UniClick system Two built-in clips. For attaching to the classical PALS / MOLLE system, two cells are required in width and two to three horizontal rows of cells in height. In this pouch, the clips are narrower (20 mm) for easier installation
• Suitable for M4 stores with MAGPUL® ORIGINAL stitches installed on them
• The pouch was sewn entirely of two layers of Cordura® 500d for strength
• From the main compartment, the pouch looks at a minimum of 5 cm of the magazine height, which is convenient for its removal
• Dimensions are large enough for easy insertion and removal of mags, including the option of placing the lid down
• The cross-section of the pouch is pulled by a rubber band sewn with 50 mm. Due to the tightening, two magazines in the pouch do not knock on each other, and one remaining mag does not hang out. The elastic is located much lower than the entrance to the pouch, so that the entrance forms an upwardly widening neck, facilitating the putting of mags
• The pouch is fastened with Velcro. Velcro on the pouch itself is longer than on the valve. This is necessary for reliable grip on the entire possible area of Velcro is equally good both for two mags, and for one (because the valve is shifted)
• Additional valve insurance with a metal button. The button is fastened only in one position - on 2 mags
• At the end of the valve is a long (8 cm) hook from the slings with a thickening at the end, for the convenience of unfastening the pouch even in thick gloves
• All Velcro is sewn in two passes around the perimeter for reliability
• At the bottom there is an eyelet for water drainage

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon)
• Weight: 108g
• Size: 21.5 × 9.5 × 6.5 cm
• Velcro: Alfatex® (Belgium)