Pouch for bottle 1-1,5L SPLAV

A simple pouch for carrying standard plastic bottles with a volume of 1-1.5 liters. It is a cylinder with a pulling top and a loop thrown onto the neck of the bottle with a convenient hold of the slings

• Mounting: two built-in clips. For attaching to the classical PALS / MOLLE system, two cells are required in width and two to three horizontal rows of cells in height
• The top of the cover and the adjustment of the loop tension on the neck of the bottle are a single unit (one elastic cord). The hinge is located on the back of the entrance to the pouch, in front the intake hood is adjusted by the Duraflex® lock. The excess ends of the cord are pulled down through the vertical guide piece (so as not to interfere). When removing the bottle from the pouch, the loop is removed from the neck and its tension is weakened together with the tension of the entry into the pouch, so that the bottle is easily pulled out and inserted. When putting the hinge on the neck, a strong tension is required to ensure a reliable containment of the bottle is restored
• All sections of fabric and sling are hidden under the seams or edged for reliability and neat appearance
• At the bottom there is an eyelet for water drainage

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon), Oxford 210d (100% nylon)
• Fittings: Duraflex®
• Size: 23 × 9.5 centimeters
• Weight: 96g