Pouch for LMG box v.2 SPLAV

Pouch for 100-rounds light machine gun box or belt.

• Mounting: UniClick third generation system. Two built-in clips. For attaching to the classical PALS / MOLLE system, four cells are required in width and two to four horizontal rows of cells in height
• Corrected geometry - the horizontal position of the clips corresponds to PALS cells 37 mm wide instead of the old 35 mm, so the pouch is installed on the latest generations of Alloy platforms and foreign products without deformation
• The pouch is fastened with Duraflex®, with the possibility of adjustment. Slings from the bottom to the top, forming a power frame
• The lid with side walls protects the contents from moisture and dirt. Its design was improved in comparison with the old model
• Dimensions of the main compartment of the pouches are reduced in comparison with the old model for a more dense landing
• In the walls of the pouch, between the layers of fabric, rigid plastic inserts are sewn. They support the shape of the pouch, making it easier to insert and remove the box. Also, thanks to this, the pouch is convenient to use with a machine gun belt without a box
• The outer side surface is sheathed by PALS cells for attaching additional pouches (three rows of two cells on each side)
• The pouch was sewn entirely from two layers of Cordura® 500d fabric
• At the bottom of the inside reinforcement of 60 mm slings to protect against wiping the flap lock box cover
• On the side near the bottom there is an eyelet for water drainage
• All edges of the fabric and the ends of the lines are edged or hidden in the seams for reliability and neat appearance

CHARACTERISTICS:

• The size of the back wall: 28 × 18 cm
• The size of the main compartment: 26 × 16 × 9 cm
• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon)
• Weight: 356 g
• Fittings: Duraflex®