Pouch for Nalgene 1L bottle SPLAV

Non-insulated pouch for carrying a wide-necked 1L Nalgene bottle (including non-standard covers), TR-1000 flask, SY-750 and SBM-750 thermos, and other cylindrical objects of similar sizes. Also accommodates a one-quarters American military flask, a flask Nalgene OASIS 1 QT and TR M-1000. The pouch can be used as a backup option for carrying 2 Saiga / Vepr-12 8-rounds magazines or JetBoil Flash burner

• Mount: UniClick third generation system. Two built-in clips. For attaching to the classical PALS / MOLLE system, two cells are required in width and two to four horizontal rows of cells in height. In this pouch, the clips are narrower (20 mm) for easier installation
• The whole pouch of two layers of Cordura® 500d for strength and maintaining a rigid shape
• Cover of complex shape, protects the contents from dirt and water. It is fastened to an adjustable fastelix, the mother part of which is attached to the surface of the fabric. The location of the installation of the fastex is reinforced from the inside by a second layer of fabric. Thanks to the adjustment, non-standard caps can be used that increase the height of the bottle, for example Nalgene OTF LID or MULTI-DRINK REPLACEMENT. It is recommended to tighten tightly the fastex strop to prevent the bottle from hanging when walking
• The pouch and its lid have a circular cross-section that is sufficiently free for unobstructed placement inside the Nalgene bottle with a suitable mug (for example, Tatonka Handle Mug) and cooking utensils (spoons, forks) put on its bottom. Table accessories are recommended to be laid vertically along the corners of the back wall of the pouch
• On the wrong side of the top of the lid is a flat pocket for small things. It is convenient for wearing tea bags or instant coffee, as well as disinfecting tablets
• The outer surface is sheathed with PALS cells for attaching additional pouches. 7 cells in width, 2 rows in height. Instead of the slings, a ribbon is used, sewn from several layers of the main fabric (Cordura® 500d). It is not inferior to the usual line of strength and provides a uniform appearance of the pouch, especially in camouflage versions. Vertical sling of fastex is freely passed under the upper middle cell of PALS. When using a one-quart American flask, the line must be run on top of the cell. A strong pulling bag is required for the height
• All sections of fabric and sling are hidden under the seams or edged for reliability and neat appearance
• At the bottom there is an eyelet for water drainage

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon)
• Fittings: Duraflex®
• Weight: 176 g
• Size: 21.5 × 10.5 (minimum height specified)