Pouch for one-quart flask SPLAV

Non-insulated pouch for the American Plastic One Quart Military Canteen, with fastex and volume adjustment. Suitable for a variety of commercial flask analogs, Nalgene OASIS 1 QT bottles and TR M-1000 flasks. With the possibility of placing inside the standard bowler (Canteen Cup) and its commercial analogs. Also, the pouch can be used as a utility or as an emergency option for carrying assault rifle mags.

• Mounting: UniClick third generation system. Two built-in clips. For attaching to the classical PALS / MOLLE system, three cells are necessary in width and two to three horizontal rows of cells in height
• The V-shaped sling retains the neck of the flask and is fastened to the adjustable Duraflex® fastex, fastened to the front surface of the pouch. The plastic substrate of fastex is covered with a cloth from the underside, without engaging or rattling on contact with the contents of the pouch. There is a rubber band to hold the excess end of the adjusting line
• Flat valve to use the pouch as a utilitarian (when the flask is carried the valve is not suitable, it needs to be rolled inside, along the back wall). The valve is sewn with a horizontal loop from the slings into which the fastex is threaded. The valve is long enough to hold AKM mags in the pouch. If the bottom of the valve interferes, you can turn it under yourself
• The entrance to the pouch is pulled by a removable elastic cord (repairable) with two stitched large Duraflex® clips. The extra ends of the cord can be threaded under the external PALS cells on the sides of the pouch
• The pouch can be used to carry 4 magazines (M4, AK-74, AKM). Mags should be laid with the rib to the body, while pulling the elastic cord for better retention
• The outer side surface is sheathed with PALS cells for attaching additional pouches (hand grenades, utilitarian, etc.). Each side has 2 cells in width, 2 rows in height. Instead of the slings, a ribbon is used, sewn from several layers of the main fabric (Cordura® 500d). It is not inferior to the usual line of strength and provides a uniform appearance of the pouches, especially on camouflage versions
• On the underside at the level of the upper edge of the bowl sewn reinforcement from the horizontal 25 mm slings to protect against rubbing
• All sections of fabric and sling are hidden under the seams or edged for reliability and neat appearance
• At the bottom there is an eyelet for water drainage

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon)
• Fittings: Duraflex®
• Size: 21.5 × 14 × 9 cm (taking the sizes of the standard flask inside)
• Weight: 155g