RPS/backpack universal belt SPLAV

Modular unloading belt, which can be used both in the form of RPS, and as a backpack. Free saturation with pouches, depending on the task

The belt has a wide curved anatomical shape, making it comfortable and the load is distributed on the hips
Built-in belt of 50 mm slings and Duraflex® fastex. The extra ends of the belt are removed under the front panels with PALS cells. If necessary, you can remove the fastex, hide or cut off all the slings and thread into the belt any belt
The seamy surface is trimmed with an Airmesh Coolmax® volumetric mesh for ventilation and softness.
Two layers of foam inside, thin stiff and thick semi-rigid

Use as RPS:

The belt has four points of suspension for H- or X-shaped straps - plastic half-rings Duraflex®. The belt is ideal for use with light universal shoulder straps v.3, as well as any other straps with four-point suspension

Use with backpacks and backpacks:

The belt can be fastened to most tactical and travel backpacks and backpacks of the SPLAV and some other manufacturers, provided that the original belt is removable. For this, the back panel of the belt with PALS cells is sheathed with velcro-loop, and special slings 25 mm and 38 mm wide retractable under the back panel are sewn on the sides.

Instructions for installing the belt on backpacks:

If the original belt is a simple 38 mm or 50 mm wide sling, threaded into two-slot buckles sewn to the bottom corners of the backpack:
25 mm belt slings to hide under the front panels as useless. 38 mm belt slings to thread into the two-slot buckle backpack , as much as possible to stretch, hide the excess ends of the slings under the front panels of the belt
If the original belt is of an anatomical shape, it is fastened by threading the belt under the lumbar cushion of the backpack (inside it is fastened with velcro) and side braces (on the belt on each side there are 1-2 slings 25 mm, on the backpack 1-2 three-slit buckles):
Insert the belt under the lumbar pillow of the backpack, check the adhesion of velcro. 38 mm belt slings to hide under the back panel as unnecessary. 25 mm belt slings to thread in the three-slot buckle side drawstring backpack, the maximum tension, the excess ends of the lines hide under the front panels of the belt

The belt is available in three sizes, differing in the number of PALS cells on each front panel: