Gas mask/baggage pouch SPLAV

A pouch for a gas mask (small models such as GP-5) is also perfectly used as a baggage. It is recommended to carry the JetBoil Sumo.

• Mounting: UniClick third generation system. Two built-in clips. For attaching to the classical PALS / MOLLE system, three cells are required in width and two to four horizontal rows of cells in height
• The pouch is fastened with Duraflex®, with the possibility of adjusting
• In the upper part of the valve, a small flat pocket with Velcro is sewn on the underside for a set of anti-fog tapes for the gas mask lens. On the new model, the hook-and-loop fastener is sewn up in a reinforced way, a slip hook is added for easy opening
• The outer surface is sheathed with PALS cells for attaching additional pouches. In the new model, the rows of PALS are located more rationally - they are displaced relative to the old position and sewn in a classic way (with a gap between rows in the width of the slings). Only three rows in height (in the old version, the pouch is two). The width of the cells is 37 mm instead of the old size 35 mm
• The pouch was sewn entirely from the lighter Cordura® 500d fabric instead of the old version 1060d
• All edges of fabric are edged for reliability and neat appearance
• All the ends of Uniclick and PALS lines are hidden under the fringing
• At the bottom there is an eyelet for draining water. The location of its installation is strengthened with a line for protection against pulling

CHARACTERISTICS:

• Size: 23 × 12.5 × 10.5 centimeters
• Internal pocket size: 9 × 9 cm
• Material: Cordura® 500d (100% nylon)
• Weight: 182g
• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Fittings: Duraflex®