Large v.2 organizer SPLAV

A large pouch-organizer for convenient placement of many small things. It can be used as a map case

Mounting: four built-in clips. For attaching to the classical PALS / MOLLE system, six cells in width and two to three horizontal rows of cells in height

Recommended use cases:

• Pouch-organizer on the front side of backpacks and knapsacks
• Commander's panel / tablet / admin-pouch on the front of bibs / flak jackets / plate-carriers

The main compartment is on a two-zippered zipper (type 10). Instead of metal tabs, a pair of hinges are used (noiseless, impossible to break). Unfastened to the very bottom, the opening angle is controlled by a removable system of paracord and Duraflex®. Paracord is passed through a system of special loops of braid, located along the perimeter of the pouch, so that it does not snap with side zippers when fastening

Frontal surface:

• A flat zippered pocket in the entire area of the front wall, with two inner hinges from the braid to hang items on the carabiner (keys, key chains, etc.).
• PALS cells for attaching small additional pouches. 6 cells in width, 2 rows in height. Instead of the slings, a ribbon is used, sewn from several layers of the main fabric (Cordura® 500d). It is not inferior to the usual line of strength and provides a uniform appearance of the pouches, especially on camouflage versions

Internal organization of the rear wall:

• A flat zip pocket made of Oxford 210d fabric, covering the whole area of the rear wall.
• Open top flat pocket, divided into two compartments.
• Three rows of rubber bands (38 mm, 25 mm, 25 mm) one on top of the other in a single layer. The elastic bands are divided into six rows of cells of different widths. This arrangement of rubber bands (one on top of the other in one layer) makes it possible to efficiently distribute objects over a maximum area. Long objects (pens, markers, forks / spoons) are fixed along the entire height, do not hang sideways. Short heavy objects are securely fastened near the bottom of the pouch by the lower elastic band (in the classical system with an elastic band in the middle they fall down). A lot of objects are fixed in several layers.
• To the top are sewn two loops of braid for hanging items on the carbine

Internal organization of the front wall:

• Two voluminous pockets with zippers made of strong mesh. They are convenient for carrying small items in bulk, because the contents are viewed and protected from falling out (the front wall opens when the pouches are opened)

Removable transparent map case:

• Sewed from two layers of transparent PVH tape, the edges are edged, the entrance is located from the bottom (to protect against precipitation).
• The cover is folded in half for placement in the pouch, and in expanded form, the dimensions are specially selected for the use of A4 paper.
• Fastening to the valve at the bottom of the bag with velcro. In the absence of a cover, the interfering valve is fastened to the return Velcro
• You can use the cover separately from the organizer. On the unfastened cover is sewn a soft Velcro-loop, which does not spoil the surrounding objects
• It is especially convenient to use a card when hanging the organizer on the chest

All sections of fabric, lanyards and rubber bands are edged or hidden in seams for reliability and neat appearance

The eyelet is not on the bottom, so as not to scratch the contents and protect from the loss of small items

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon), Oxford 210d (100% nylon)
• Fittings: Duraflex®
• Velcro: Alfatex® (Belgium)
• Zippers: SBS®
• Cord: Paracord 550, 100% nylon
• Size: 18 × 25 × 5 cm
• Weight: 357g