Pouch for 2 pistol magazines v.2 SPLAV

A set of 2 Velcro pouches for modern pistols mags (PY, APS, Glock 17, SIG-Sauer P226, etc.). With the possibility of adjusting for height and lateral weights. Also can be used for carrying various large folding knives, flashlights, etc. objects (dimensions - height about 12-14 cm, diameter up to 3 cm). Not compatible with PM mags and multi-tools (too short)

• Mounting: two removable clips, not included. For attaching to the classical PALS / MOLLE system, two cells are necessary in width and two horizontal rows of cells in height. Attention! To mount the pouch, you need to purchase two clips of the following types:
• For PALS / MOLLE platforms and belts with a width of up to 50 mm inclusive: 2M MOLLE 75 mm, 3" TacTie (Maxpedition), MALICE Short (Tactical Tailor), FixClip 3 "(Kiwidition)
• For belts with a width of up to 60 mm inclusive: 2M MOLLE 60 mm
• For belts with a width of 58-60 mm (for example, US Belt): ALICE, 2M MOLLE 60 mm
• Pouch is designed for a tight mag carrying
• The pouch was sewn entirely of two layers of Cordura® 500d for strength
• From each compartment, a minimum of 3 cm of the height of the pistol mags peeks out, which is convenient for extracting them
• The feature of this product is a noticeable (1.5 cm) gap between the compartments, so that a gap is formed between the covers of the two mags. It greatly facilitates the extraction of mags, because It allows to cover the cover of a separate mag with your fingers without interference from the neighboring mag
• The cross section of each compartment is pulled by a 35 mm elastic band. Thanks to the tightening, the mag is tightly held in the pouch even when the valve is unbuttoned (the valve can be filled into the store when not needed, when quick access is required). The elastic is located below the entrance to the pouch, so that the entrance forms an upwardly widening neck, facilitating the introduction of mags
• The pouch is fastened with Velcro. Velcro on the pouch itself is longer than on the valve. This is necessary for reliable grip on the entire possible area when adjusting for mags of different heights
• At the ends of the valves, 2 cm of snag for the convenience of unfastening the pouch even in thick gloves
• All Velcro will be sewn in two passes along the perimeter or additionally along diagonals for reliability
• At the bottom there are eyelets for water drainage

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon)
• Velcro: Alfatex® (Belgium)
• Weight: 58 g
• Size: 14.5 × 10 × 2.5 cm