Pouch for harness SPLAV

Pouch for harness SAT, its analogs and other models. Provides a deaf protection of the harness from external factors (water, dirt, sand, dust, sun) and at the same time intuitively simple and quick access to the harness with one move. Inside, you can lock the marker (to record the time of laying the harness)

• Mounting: one integrated clip. For attaching to the classical PALS / MOLLE system, one cell is necessary in width and two horizontal rows of cells in height
• The cover is a bundle, tightly wrapped around a bundle. Velcro on the side edges of the convolution are fastened to a wide velcro on the back of the pouch. Above, the cover is fastened with a small flap on the Velcro and a metal button in its center
• The valve is sewn with a wide sling with a thickening at the end, it is convenient even when working with wet hands and thick gloves. It is pulled out in a move in the direction upwards and forwards until the cover is fully opened
• The top of the convolution has special folds, providing when closing the blind protection of the contents from external influences (most analogues in this place have slots)
• The cover in buttoned form has a round, smooth shape without any convex and engaging parts on the outer surface. All fasteners and pincers are on the back of the pouch
• The pouch was specially created for the C-A-T North American Rescue hareness of all generations, but it is also compatible with its numerous analogs and other models: The blood-thinning harness GK-Medplant, FAST SRVV®, SurvCat, ESP Arm Dn  TCCC krtidlo (RT-01), SOF®TT, SOF®TT-W, Esmarch's medical hemostatic harness, Atraumatic hemostatic harness "Alpha"
• The CAT harness must be laid in an unbuttoned cover as follows: The harness should be rolled up according to the manufacturer's official instruction for one-handed use. A flat surface outward, a twist rod to a wide sling with elastic cords. In this case, the velcro fastener will remain flat as much as possible and provide a reliable grip over the entire area. The shackle lock rod is located on the valve side with a button and a stitch (since the cover has an extension in this part). CAT analogues and SOF® tows are stacked in a similar way (the orientation of the flat side and bulging massive parts). Domestic rubber bands are wound up in the longest (in the height of the cover) and a narrow package
• It is sewed from a wide nylon slings and Cordura 500d fabric (100% nylon) in one layer, all slices are hidden.
• The cross is sewn on the outer surface with a cross of 5 × 5 cm from the rubberized material Hypalon. The cross is cut by a laser. For colors, the Olive's pouch, Digital Flora, Multipat cross is made in black, for the coloring of the pouch The black cross is made in olive-colored
• The harness can be additionally secured with a detachable adjustable elastic cord that forms two loops in the middle of the inside of the underpack. In this case, when the cover is opened, the bundle does not fall out, but remains inside, being fully accessible for rapid extraction in the downward direction
• Inside there is a loop of dense rubber bands and a pocket-stop for fixing the marker (inscribing the time of laying the harness)
• At the bottom of the cover in a buttoned-up form there are small slots designed for drainage of water

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon), Hypalon ORCA® (Belgium)
• Velcro: Alfatex® (Belgium)
• Size in buttoned form (H × W × T): 16.5 × 7 × 4 cm
• Weight: 75g