Pouch for pistol magazine SPLAV

  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
  • Pouch for pistol magazine SPLAV
Choose Color:
In stock
$11

Velcro pouch for 1 modern pistols magazine (PY, APS, Glock 17, SIG-Sauer P226, etc.). With the possibility of adjusting for height and transverse tightening. Also can be used for carrying various large folding knives, flashlights, etc. objects (dimensions - height about 12-14 cm, diameter up to 3 cm). Not compatible with PM mags and multi-tools (too short)

  • Mounting: one removable clip, not included. For attaching to the classical PALS / MOLLE system, one cell is necessary in width and two horizontal rows of cells in height. Attention! To attach the pouch, you need to purchase one clip of the following types:
  • For PALS / MOLLE platforms and belts with a width of up to 50 mm inclusive: 2M MOLLE 75 mm, 3" TacTie (Maxpedition), MALICE Short (Tactical Tailor), FixClip 3 "(Kiwidition)
  • For belts with a width of up to 60 mm inclusive: 2M MOLLE 60 mm
  • For belts with a width of 58-60 mm (for example, US Belt): ALICE, 2M MOLLE 60 mm
  • Pouch is designed for a tight fit of the mag
  • The pouch was sewn entirely of two layers of Cordura® 500d for strength
  • From the main compartment, the pouch looks at a minimum of 3 cm of the height of the pistol mag, which is convenient for removing it
  • The cross-section of the pouch is pulled by a 35 mm elastic band. Thanks to the tightening, the mag is tightly held in the pouch even when the valve is unbuttoned (the valve can be filled into the mag when not needed, when quick access is required). The elastic is located below the entrance to the pouch, so that the entrance forms an upwardly widening neck, facilitating the introduction of mags
  • The pouch is fastened with Velcro. Velcro on the pouch itself is longer than on the valve. This is necessary for reliable grip on the entire possible area when adjusting for mags of different heights
  • At the end of the valve is a 2 cm snug for the convenience of unfastening the pouch even in thick gloves
  • All Velcro will be sewn in two passes along the perimeter or additionally along diagonals for reliability
  • At the bottom there is an eyelet for water drainage

CHARACTERISTICS:

  • Slings: 100% nylon
  • Threads: Liberty® (Netherlands) filament nylon bonded
  • Material: Cordura® 500d (100% nylon)
  • Velcro: Alfatex® (Belgium)
  • Weight: 29g
  • Size: 14.5 × 5 × 2.5 cm
Conditionnew
Weight60 g

Be the first to write a review of this product!