Filter B1 for PPM-88
Gas filter B1 for purifying air contaminated by inorganic gases and vapors (for example, halogens, hydrogen sulfide, hydrogen cyanide, cyanogen chloride, carbon disulfide), in addition to carbon monoxide.
The filter trunk is made of a special plastic and curb absorption layer (the charge) of the sorbent.
Gas Filter B1 is used as part of a filtering mask (with a full face mask).
|
filter Brand |
filter class |
Substances on which protects the filters of the brand |
Marking color |
|
А |
1 \ 2 |
Vapors from gases and organic substances having a boiling point above 65 ° C (cyclohexane, benzene, xylene, toluene, acetonitrile, nitrobenzene, tetraethyl, phenol, furfural, and others). |
|
|
В |
1 \ 2 |
Of inorganic gases and vapors (chlorine, hydrogen sulfide, hydrogen cyanide, cyanogen chloride, carbon disulfide, iodine, etc.),in addition to carbon monoxide |
|
|
Е |
1 \ 2 |
Of acid gases and vapors (sulfur dioxide, hydrogen chloride, phosphine, etc.). |
|
|
К |
1 \ 2 |
From ammonia and his organic derivatives |
|
TECHNICAL CHARACTERISTICS OF THE FILTER:
| Name specifications | Value |
|---|---|
| Diameter, mm | 108 |
| Height mm | 96 |
| Weight, g | 280 |
| Connecting thread corresponds to GOST 12.4.214-99, mm | 40x3,5 |
| filter resistance, Pa, not more than: | |
| - At a constant flow rate of 30 dm 3 / min | 100 |
| - At a constant rate of 95 dm 3 / min | 400 |
| Time of protective action on the test substance, min, not less than: | |
| - When hydrogen sulfide concentration of 1.4 mg / dm 3 | 40 |
| The maximum concentration of vapor (gas) of chemical substances in the filter using,% (vol.) | 0.1 |
| Guaranteed shelf life, years | 5 |
| Filter complies | GOST R 12.4.251-2009 |
| Weight | 0.28 kg |
| Condition | new |
Отзывы
Be the first to write a review of this product!


