Pouch for Saiga/Vepr magazine with velcro adjustable SPLAV

Pouch for smooth-bore Saiga / Vepr mags of various calibers. It has a adjustable volume pull and a detachable height-adjustable valve with velcro. It is possible to use a pouches without a valve for quick access to the mag

• Mounting: UniClick third generation system. Two built-in clips. For attaching to the classical PALS / MOLLE system, two cells are required in width and two to three horizontal rows of cells in height
• Attention! Compatible with the following mags: 12 gauge - 8-rounds, 410 cal - 10-rounds, 20 gauge - 8 and 10-rounds
• The pouch was sewn entirely of two layers of Cordura® 500d for strength
• The cross-section of the pouch is pulled by an elastic cord of large type with adjustable Duraflex® lock. The cord is much stronger than ordinary wide rubber bands, it can be adjusted or completely removed, it is repairable. Due to the tightening, the pouch can hold the magazine securely even without a buttonhole
• In the front wall of the bag, a piece of plastic is sewed between two layers of fabric. It supports the form of a pouch and greatly facilitates the introduction and extraction of mags. In addition, hard plastic does not give a tightly stretched elastic cord to deform the front wall, which could make it difficult to insert the magazine inside
• The pouch is fastened with Velcro. Velcro on the pouch itself is longer than on the valve, to facilitate the adjustment of the pouch for a particular mag
• The valve is fastened with Velcro from the inside to the back wall of the pouch. The seat of fastening can be selected in height, thus the height of the pouches in the buttoned mode (for different types of mags) is regulated. It is recommended to adjust the valve so that the Velcro of the valve coincides with the middle of the return Velcro on the pouch (the greatest grip when carelessly fastening). When releasing the valve, you may need an additional tool, such as a metal ruler, which you need to place between the flaps
• The fastened valve is additionally held by a horizontal strap at the top of the pouch, it plays the role of an anti-tearing element. Also, under this line, you can fill the end of the valve to quickly move the pouch into the mode of quick access to the mags (see photo in the catalog), it will not interfere. Both ends of the valve are narrowed for easier siphoning
• In the center of the valve, a 25 mm Velcro is installed on the inside of the valve, allowing you to fold and fasten the valve to yourself, if not in use (quick access to the mags)
• At the end of the valve is a long (8 cm) hook from the slings with a thickening at the end, for the convenience of unfastening the pouch even in thick gloves
• All sections of fabric and sling are hidden under the seams or edged for reliability and neat appearance
• All Velcro will be sewn in two passes along the perimeter or additionally along the diagonals for reliability
• At the bottom there is an eyelet for water drainage

CHARACTERISTICS:

• Slings: 100% nylon
• Threads: Liberty® (Netherlands) filament nylon bonded
• Material: Cordura® 500d (100% nylon)
• Fittings: Duraflex®
• Velcro: Alfatex® (Belgium)
• Weight: 140g
• Size: 25 × 11 × 4 cm (the height is given for the Saiga / Vepr-12 8-rounds magazine)